0

Benefits of using SmartPump Technology

Some of the major benefits of using SmartPump technology are as under

– Find more about SmartPump here –

Reduction in Electricity Bill

Limited usage of Suction PumpSmartPump

SmartPump device periodically turns on the motor and checks for incoming water. If the water pressure is good lets the pump run and fill the underground tank. If the pressure is low, it automatically turns off the pump saving electricity and wear and tear of the pump.
SmartPump device also continuously checks the underground tank and turns off the pump when it’s full preventing water overflow.

Incoming water sensor algorithm

SmartPump preserves electricity by utilising it’s incoming water pressure sensing algorithm and optimising the usage of pump only when incoming water pressure is above required value.
For example lets assume that if water pressure in the main line is 100% and at this pressure it takes 1 hour to fill the underground tank. If the incoming water pressure is 20% then using simple arithmetic it will take 5 hours to fill the same tank.
Now, it is not possible for humans to check the water pressure all the time however our SmartPump Device continuously checks for incoming water pressure and turns on the pump only if the pressure is above acceptable range thus filling the underground tank as soon as possible and using pump time as low as possible.

Reduction in Pump Maintenance

As SmartPump device reduces the usage of suction pump, it automatically reduces the wear and tear of the pump and motor and hence reduces cost of maintenance and repairs.

Use your Mobile to View and Control Operations

If you are an Android mobile user then we have some treat for you. By purchasing our mobile supported SmartPump, you can easily view and / or control the entire operation using our SmartPump Mobile App. Some of the benefits of using SmartPump  app are as under

Smart Pump Mobile App FeaturesSmartPump Mobile App

– Displays status of underground motor (ON/OFF)
– Displays status of overhead motor (ON/OFF)
– Allows users to control underground motor
– Allows users to control overhead motor
– Allows users to change timer for overhead motor
– Allows users to change timing of motor on/off for water detection.
– Allows user to change duration for water detection
– Displays status of incoming water pressure (1-100%)
– Displays status of underground water tank (Empty/Full)
– Displays status of overhead water tank (Empty/Full)

Save Time, Money, Mental and Physical Energy

You don’t have to worry about checking for water anymore. You don’t have to stay awake at nights and check for water. You don’t have to spend your entire day worrying about water. SmartPump does all that for you automatically giving you time and energy to work on more productive things in life.

People who are sleep deprived are more likely to be irritated, frustrated, agitated and lack focus in daily life. Install SmartPump and get full night’s sleep, be more productive and mentally relaxed in your daily life.

Even if you are not at home, SmartPump runs continuously and fills your underground tank when ever it detects water in main line and turns off the pump when underground is full.

Cost vs Benefit ratio of using SmartPump Technology

A 2 horse power suction pump approximately consumes 1 Unit of electricity unit per hour.
Lets assume that we are using SmartPump 24 hours a day using following settings
(Note: all calculations are done on Rs. 15/- per unit electric cost)

  1. Check water after every 30 minutes
  2. Wait for water for 30 secs

Using the above settings, the pump will run for 1 minutes per hour which means 24 minutes in 1 day, consuming 0.4 units per day which means 12 units in one month.. assuming that 1 unit = 15 Rupees, Motor will generate electricity bill of Rs. 180 per month + the usage of pump when the water is detected and tank is filled.

By paying just Rs. 180/- per month extra you can ensure that you get underground tank full every day for the whole month…

Find below more rates based on different settings

Check water every 1 Hour
Check water for 30 seconds
Total bill generated = Rs. 90/- per month

Check water every 2 Hour
Check water for 1 Minute
Total bill generated = Rs. 90/- per month

Check water every 15 minutes
Check water for 30 seconds
Total bill generated = Rs. 360/- per month

Check water every 30 Minutes
Check water for 1 Minute
Total bill generated = Rs. 360/- per month

Now that we have calculated the cost of operations; lets also calculate the amount of electricity SmartPump saves every month.

Assuming
That your pump runs for 5 hours every day, which means
5 units of electricity used every day
150 units of electricity consumed every month
Bill generated = Rs 2,250/- per month by motor

Using SmartPump: Assuming
That your pump runs for 1 hour every day, which means
1 units of electricity used every day
30 units of electricity consumed every month
Bill generated = Rs 4,50/- per month + Rs 180/- for 24 hours checking time
Total Bill generated = Rs. 630/-

You Save approximately Rs. 1, 620/- every month in electricity only

Conclusion

Shortage of water and energy are two of the biggest problems faced by our planet today, if we continue to live the way we do right now, wasting water and energy; we may be looking at a catastrophe for our generations to come.

SmartPump makes intelligent decision on how to and when to turn on the water pump, fill the underground tank and turns off the water pump when the tank is full. SmartPump also checks for incoming water pressure and turn off the pump if the water pressure is low. Everything is done automatically by SmartPump and you get tank full of water without lifting a finger.

SmartPump preserves electricity by preventing water pump and overhead motor running redundantly.
SmartPump preserves water by preventing water wastage in underground and overhead tank overflow.

Other benefits of using SmartPump are
– Reduces electricity bill
– Prevents motor wear and tear
– Increases motor life
– Increases pump life
– Never worry again about water shortages again
– Never worry again about water overflow again
– Smartly manage your pump and motor using your mobile while sitting in your home

In Short, using SmartPump does not only make life easier it also preserves water and saves electricity making it more environment friendly and economical choice. A Must have for every home.

– Click Here to purchase SmartPump online  –

– Click Here for more information  –

– Visit our FaceBook Page  –

– Click here to find out more about our company –

Absar A. Ansari

Leave a Reply

Your email address will not be published. Required fields are marked *